 |
||
| Item | Detail | Additional comments |
| Number of beams | 47 non-focused beams plus 3 separate photoeyes |
Infra-red |
| Origin of lowest beam | 1" (26mm) | See drawing outline |
| Protected area | Diagonal matrix | See drawing outline |
| Photo-eye heights | 4.8", 28.4", 52" (122, 722, 1322mm) | See drawing outline |
| Unit size | 1.18" x 0.8" x 7' (30x20mmx2136mm) | |
| Mounting | Five screw positions | See drawing outline |
| Range of detection | 6' Door mounted (1800mm) | |
| Positional mounting tolerance (doors closed, units touching) | +/- 0.7" (18mm) vertically +/- 0.2" (5mm) side by side |
Doors closed, units touching |
| Fail safe conditions | Faulty cable: Supply failure: |
Fail safe to both Short or Open circuit faults Output relay switch to detect state |
| Indicators | Supply present: System fault / beams obstructed: |
Green LED Red LED |
| Control unit | Formula Systems Control Unit | FPS0265 - Full Feature (see specification) |
| Operating voltage | 24 volts dc (ELV circuits) | |
| Current consumption | 85mA typical (transmitter) 40mA typical (receiver) |
|
| Cable supplied | Two x 16' (5m) approx of 3 core cable | Cut to suit on site |
| Case material | Aluminium alloy | Finished Black |
| Cover (filter) | Infra-red transparent plastic | Snap-on fixing |
| Operating temperature range | 0°C to +70°C | |
| Storage temperature range | -40°C to +80°C | |
| Environmental protection | Conformal coating to PCB's | |
| Ambient light conditions | Unaffected by sunlight | |
| Installation kit |
Instructions - 1 off
|
|
|
Spacer Block - 1 off
|
||
|
Cable Clips - 6 off
|
||
|
Nytie - 3 off
|
||
|
Screws 8-32unc x 1/2" -20 off
|
Hex. Flanged Head (s. Tap) | |
|
Washers -20 off
|
||
|
Washer Spring - 20 off
|
||
|
Mounting Bracket -2 off
|
||
|
Screws M5.0 x 10mm -10 off
|
||
|
Washers M5.0 - 10 off
|
Use with Mounting Bracket | |
|
Cable retainer - 2off
|
Optional | |
|
Screwdriver - 1 off
|
Optional | |
|
Drill Bit - 1 off
|
Optional | |
| SYSTEM APPROVALS | UL (Underwriters Laboratories Inc. File Number 8B95 EMC EN 50081-3 (EN55022) |
Evaluated to United States and Canadian National Standards |
