Diagrams:
 |
||
| Item | Detail | Additional comments |
| Number of beams | 35 non-focused beams | Infra-red |
| Number of Sensors | 18 | See beam pattern |
| Sensor Spacing | 3.8" (96mm) | See beam pattern |
| Scan Type | Interleaved | |
| Response Time | 48 to 96 milliseconds | Relates to point of detection in scan cycle |
| Range of detection | 5' (1500mm) Door mounted 10' (3000mm) Track end mounted |
Switch selected |
| Light Immunity | 50,000 lux | Visible light |
| Angular displacement | 10° (Inclusive) | |
| Positional mounting tolerance (doors closed, units touching) | +/- 0.4" (10mm) vertically +/- 0.16" (4mm) side by side |
|
| Fail safe conditions | Faulty cable: Supply failure: |
Fail safe to Open circuit faults Output switch to detect state |
| Operating voltage | 24 volts | 18 volts min 30 volts max |
| Current consumption | <100 mA RMS | Total of both units |
| Control unit | FPS (0270 or 0271) Universal Interface | Not neccessary when controller unit permits direct connection of COL. |
| Environmental protection | Conformal coating to PCB's | |
| Operating temperature range | 0°C to +70°C | |
| Storage temperature range | -40°C to +80°C | |
| Unit size | 0.35" x 1" x 6' (9 x 26.5 x 1866mm) | See mechanical detail drawing |
| Mounting | Seven fixing points (Provided) | See mechanical detail drawing |
| Cable supplied | 11' (3400mm) Long | Gebauer & Griller ‘Polyflex’ Supplied pre-wired to product |
| Case material | Aluminium alloy | Silver Anodized |
| Cover (filter) | Infra-red transparent plastic | |
| Installation Kit (Supplied) | Instructions - 1 off | |
| Cable Clips - 10 off | ||
| Screws M3.5 x 16mm - 26 off |
Pan Head Pozi drive | |
| Nuts M3.5 - 16 off | ||
| Washers M3.5 - 32 off | ||
| Washer Spring M3.5 - 42 off | ||
| System Markings | UL, cUL, CE (EMC) | EN12015, EN12016. |
